Introduction to the knowledge related to high-precision positioning of UWB modules of pig farm equipment. The so-called equipment positioning, as the name suggests, is a method of positioning through UWB modules. It has played a huge role in daily production and life. For example, in aquaculture, in order to ensure the number of poultry, we can install UWB module positioning for each animal, let us learn more about it.
With the development of science and technology, the UWB module equipment of pig farms has been continuously improved and perfected. Due to the different actual conditions and environmental climates in different places, the selection of equipment specifications, models and materials should also be different, and there is no need to force the same during use. In areas with poor economic conditions or good natural environment for raising pigs, it is not mandatory to install all the following pig raising equipment, and should be reasonably configured and selected according to the needs of pig raising.
What material is good to choose for UWB module equipment in pig farms, usually pay attention to the following points:
1. In the pig farm environment with pig manure water and water-containing food residues, it is highly corrosive to the steel without reasonable surface treatment.
2. Requirements for structural rigidity, such as the strength of the limit bar in the sow part is sufficient, and it is not easy to be damaged by the sow; the floor of the sow part should have sufficient bearing capacity to ensure the safety of the sow and a longer service life; In addition to corrosion, sow troughs should also withstand sow bites.
3. Comfort: the part in contact with the pig is round, smooth and free of burrs, the material has a low thermal conductivity and is not too cold, the piglet incubator has good thermal insulation performance, the infrared heating lamp has concentrated heat, and the heat release is stable, and the piglet will not squeeze close to the bulb to climb climb.
4. Easy to clean and sterilize.
5. Economy: low cost of comprehensive use, long service life and good appearance. In the process of raising sows, due to the sows running around or other reasons that may lead to miscarriage or other things, pig farmers are always worried about this situation, so they have developed sow positioning bars, which can not only effectively protect but also facilitate farmers' maintenance. Feeding management.
Sow UWB module positioning bar installation method:
①Set the walkway distance, place the side feet on both ends of the unit, and after pulling the positioning line, observe whether the distance between the feet on both sides is equal, and there is no slope directly.
②Place the other side feet in turn, the distance between the horizontal feet is the width of the floor, and the distance between the side feet and the middle foot is the length of the floor.
③ Install the floor between the side foot and the middle foot, don't forget to tighten the screws.
④At this time, observe whether the left and right columns are safe and reversed, and whether they are installed horizontally and vertically.
⑤ Install the front and rear doors of the positioning bar.
Sow farrowing and newborn piglet feeding is a very important part of pig production. Newborn piglets are individually small and weak, their body temperature regulation function is not perfect, and their resistance to cold is poor. Litters often freeze to death in winter and are crushed to death. , the risk of trampling injury. The unevenness of the piglet survival rate depends largely on the layout of the pig house, heating and ventilation and the layout of the farrowing pen.
The UWB module positioning pen is a single pen, where the sows give birth and suckle. In the center of the positioning pen is the sow cage, where the sow is farrowing and breastfeeding. Both sides are places for piglets, drinking water and heating activities. The sow restraint frame is usually made of round steel pipe and aluminum alloy, and the rear device drains the floor to remove manure and dirt. On both sides are piglet activity bars, which are used to block piglets. The farrowing and nursery pens are key to the modern picture of the pig farm. Promoting safe and comfortable labor and maintaining the breeding environment is very important for the survival rate and growth of piglets, sow lactation and muscle.
UWB module positioning bar effect:
1. It can maintain the piglets and avoid being crushed by the sow.
2. It can provide 30℃ microclimate and microenvironment for newborn pigs.
3. It can provide excellent sanitary conditions, avoid the accumulation of living organisms and bacterial reproduction, and reduce piglet diseases.
4. Facilitate the management of sows and piglets.
